Bamboo lamps and lanterns, natural with a poetic and pictorial mood. Used in the walls and spaces of homes, families and hotels, it easily adds a layer of ancient elegance to daily life. What is the best finish for a bamboo lamp. this is a very delicate craft for bamboo lamp factory.
what is the best finish for a bamboo lamp? The specific process is as follows.
Bleaching of bamboo lamp bamboo
1. Soaking and cooking method. Put the bamboo into 1% bleach solution and soak for about 1 hour. Take out and put into 5% acetic acid solution for 30 minutes, then take out the bamboo and wash it with water, bleach away the liquid attached to the bamboo, and dry it in the sun.
2. Sealed fumigation method. Put the bamboo into a sealed container and smoke it with sulfur dioxide gas for 24 hours, then wash, rinse and dry it in the sun. Sulfur dioxide gas is toxic, pay attention to prevent poisoning.
3. Dipping and grinding method. Immerse the bamboo in washed rice water for 48 hours, then take it out, then grind with fine sand grass rope and wash and dry.
Surface coloring of bamboo lamp
1. Pharmaceutical coloring method. Bamboo into caustic soda or sulfuric acid solution boiled for 3-5 minutes, and then into the alkaline dye boiled for 30 minutes, you can coloring does not fade.
2. Acid painting method. First wipe the surface of the bamboo, coated with dilute sulfuric acid becomes black, coated with dilute nitric acid becomes russet, coloring immediately after the fire, can make the bamboo never fade.
3.Acid coating and sprinkling mud method. First wipe the surface of the bamboo, then coated with dilute sulfuric acid or dilute nitric acid, and then sprinkle some mud on the bamboo surface, baked by fire, when the mud becomes yellow or russet, wash off the mud with water, the bamboo is the formation of irregular "spot", and the bamboo with mud will not change color.
Bamboo lamp anti-mildew measures
1. brush method is to evenly brush the anti-mildew agent on the surface of the bamboo lamp to inhibit or kill the surface mold, the method is easy to operate, but only suitable for short-term anti-mildew.
2. impregnation method is to dip the bamboo into the anti-mildew solution, so that the solution into the tissue inside, according to the different treatment methods, can be divided into room temperature impregnation, heating impregnation, hot and cold bath alternate impregnation. General hot and cold bath alternate method of mildew prevention effect is greater than the hot dipping method is greater than room temperature impregnation.
There are many other ways to deal with bamboo lamps and lanterns, we as china lamp manufacturer, the main direction of researching bamboo lamps and lanterns lies in the development of bamboo material itself and the beautification of bamboo modeling. On this basis, we enhance the bamboo processing technology to make its products more beautiful and more suitable for viewing and using.
Post time: Jul-31-2023